亚洲城ca88手机版-官亚洲城会员登录入口-首页

服务热线电话

400-6188-756

亚洲城ca88手机版技术应用于涂装前处理具有的优点

来源:/ 时间: 2022-08-08 浏览次数: 2

亚洲城ca88手机版是超声波清洗机的一个分支,可用于金属表面的磷化处理的前处理。所谓磷化,是指用含有磷酸二氢钠的酸性溶液处理后,在金属工件表面生成稳定的不溶性磷化膜的方法,所得膜称为磷化膜。磷化膜的主要目的是增加膜层的附着力,提高涂层的耐蚀性。如果采用传统工艺对工件进行酸处理,会造成严重的环境污染和恶劣的工作环境。同时,缺点是结构复杂的零件酸洗除锈后的残酸难以清洗。工件喷涂一段时间后,沿缝隙发生腐蚀,损坏涂层表面,严重影响产品外观和内部质量。所以,改进后的工艺是脱脂、水洗、超声波除锈、水洗、表调、磷化、超声波漂洗、烘干。工艺增加了两台亚洲城ca88手机版,由盐酸除锈改为以磷酸为介质的超声波除锈,烘干前的水洗改为超声波漂洗。
Automatic ultrasonic cleaning machine is a branch of ultrasonic cleaning machine, which can be used for pretreatment of phosphating treatment of metal surface. The so-called phosphating refers to the method of forming a stable insoluble phosphating film on the surface of metal workpieces after treatment with an acidic solution containing sodium dihydrogen phosphate. The resulting film is called phosphating film. The main purpose of phosphating film is to increase the adhesion of the film and improve the corrosion resistance of the coating. If the traditional process is used to treat the workpiece with acid, it will cause serious environmental pollution and bad working environment. At the same time, the disadvantage is that it is difficult to clean the residual acid after pickling and derusting the parts with complex structure. After the workpiece is sprayed for a period of time, corrosion occurs along the gap, damaging the coating surface and seriously affecting the appearance and internal quality of the product. Therefore, the improved process is degreasing, water washing, ultrasonic derusting, water washing, surface conditioning, phosphating, ultrasonic rinsing and drying. Two sets of ultrasonic cleaning equipment are added to the process. The rust removal by hydrochloric acid is changed to ultrasonic rust removal by phosphoric acid as the medium, and the water washing before drying is changed to ultrasonic rinsing.
亚洲城ca88手机版技术应用于涂装前处理,具有以下优点:首先,超声波清洁工件表面将达到非常均匀和清洁的效果。利用超声波清洗机的工作原理,可使清洗液中的气泡均匀破碎,使清洗均匀。其次,它不会损坏高精度的表面。如采用水基工业清洗剂代替传统的强酸强碱,避免了强酸强碱和有机溶剂对环境的污染,符合环保要求。超声波清洗还可以有效减少有毒溶剂造成的污染和人身伤害。再次可自动清洗,无需人工重新刷涂,很好地避免了人工清洗过程中的人为损坏和工作场所脏污。清洗后,使用磷酸盐可以更好地提高耐腐蚀性,改善基材与涂层或其他有机饰面层之间的附着力,并清洁表面,这可以很好地改善材料的冷加工性能,如拉丝、拉管、挤压,提高表面摩擦性能,促进其滑动。
The application of full-automatic ultrasonic cleaning machine technology to coating pretreatment has the following advantages: first, ultrasonic cleaning of the workpiece surface will achieve a very uniform and clean effect. Using the working principle of the ultrasonic cleaning machine, the bubbles in the cleaning liquid can be uniformly broken and the cleaning is uniform. Second, it does not damage the high-precision surface. If water-based industrial cleaning agent is used instead of traditional strong acid and strong alkali, the environmental pollution caused by strong acid and strong alkali and organic solvent is avoided, which meets the environmental protection requirements. Ultrasonic cleaning can also effectively reduce pollution and personal injury caused by toxic solvents. It can be automatically cleaned again, without manual re brushing, which can well avoid artificial damage and dirty work place during manual cleaning. After cleaning, the use of phosphate can better improve the corrosion resistance, improve the adhesion between the substrate and the coating or other organic finishing layers, and clean the surface. This can well improve the cold processing performance of the material, such as wire drawing, pipe drawing and extrusion, improve the surface friction performance and promote its sliding.
以上就是为大家先容的有关亚洲城ca88手机版的详细的先容,希翼对您有所帮助.如果您有什么疑问的话,欢迎联系大家.大家将以专业的态度,为您提供服务
The above is the detailed introduction of the automatic ultrasonic cleaning machine. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude
上一篇:微纳超声波清洗机 下一篇:最后一页

联系大家

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:济南市先行区太平街道机械装备产业园创业路二号

亚洲城ca88手机版

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:

亚洲城ca88手机版|官亚洲城会员登录入口

XML 地图 | Sitemap 地图