亚洲城ca88手机版-官亚洲城会员登录入口-首页

服务热线电话

400-6188-756

在电镀工业中清洗机都有什么用途?

来源:/ 时间: 2021-08-17 浏览次数: 2

超声波清洗机使用产生空化效应的超声波在液体,可以去除石油从工件表面,配合适当的清洁剂,工件表面可以迅速达到高清洁度。电镀过程中,工件表面清洁度要求高,超声波清洗是可以满足要求的。
The ultrasonic cleaning machine uses the ultrasonic wave that produces cavitation effect in the liquid, which can remove oil from the workpiece surface. With appropriate detergent, the workpiece surface can quickly reach high-definition cleanliness. In the electroplating process, the surface cleanliness of the workpiece is required to be high, and ultrasonic cleaning can meet the requirements.
超声波清洗机的使用,可以替代溶剂清洗油;可以取代电解除油;可以取代酸蚀刻去除表面的锈蚀碳钢和低合金钢和规模。超声波清洗机的应用,可以使许多传统清洗过程简化,大大提高清洗质量和生产效率。
The use of ultrasonic cleaning machine can replace solvent cleaning oil; It can replace electrolytic oil removal; It can replace acid etching to remove the rusted carbon steel and low alloy steel and scale. The application of ultrasonic cleaning machine can simplify many traditional cleaning processes and greatly improve the cleaning quality and production efficiency.
工业超声波清洗机
特别是对于形状更复杂和要求较高的工件边缘有更多的优点。使用超声波清洗技术在广泛的替代角色的强酸、强碱、大大减少和环境污染,改善劳动环境,减轻劳动强度,保护生态环境,做出贡献。
Especially for the workpiece edge with more complex shape and higher requirements, it has more advantages. The use of ultrasonic cleaning technology in a wide range of alternative roles of strong acid, strong alkali, greatly reduce and environmental pollution, improve the working environment, reduce labor intensity, and protect the ecological environment.
1。抛光膏抛光表面的清洁。
1。 Cleaning of polishing paste polishing surface.
在正常情况下,抛光膏经常使用石蜡混合、石蜡分子重量,高熔点,正常温度是固体,更难以清洁的材料,传统的方法是使用有机溶剂清洗或高温碱煮,有许多弊病。使用超声波清洗可以使用水基清洗剂,的情况下,介质温度,在几分钟内将彻 底地清洗表面,常用的过程是:
Under normal circumstances, polishing paste often uses paraffin mixture, paraffin molecular weight, high melting point, normal temperature is solid, more difficult to clean materials, the traditional method is to use organic solvent cleaning or high-temperature alkali cooking, which has many disadvantages. When ultrasonic cleaning is used, water-based cleaning agent can be used. In case of medium temperature, the surface will be thoroughly cleaned within a few minutes. The common process is:
(1)浸泡,(2)超声波清洗——(水)(3)水冲洗。
(1) Immersion, (2) ultrasonic cleaning - (water) (3) water flushing.
2。表面的油和少量的生锈的冷轧钢板。
2。 Surface oil and a small amount of rusty cold rolled steel plate.
一般有冷轧钢板表面油污、灰尘或少量的铁锈,洗干净容易,但是在一般的方法来清洁表面仍然是一个非常薄的一层浮灰,影响后续加工质量,有时可能不再使用酸浸法去除这一层浮灰。和使用适当的超声波清洗和清洁液,可以方便地实现彻 底清洁表面,使工件表面具有高的活动,有时甚至撤销酸洗电镀前激活过程。
Generally, there is oil stain, dust or a small amount of rust on the surface of cold-rolled steel plate, which is easy to clean, but in the general method to clean the surface, it is still a very thin layer of floating ash, which affects the subsequent processing quality. Sometimes, the acid leaching method may not be used to remove this layer of floating ash. With the use of appropriate ultrasonic cleaning and cleaning solution, it is convenient to thoroughly clean the surface, so that the workpiece surface has high activity, and sometimes even cancel the activation process before pickling and electroplating.
3。表面的氧化皮和条锈病的工件。
3。 Surface scale and stripe rust of the workpiece.
传统的方法是用盐酸或硫酸浸泡清洗。如使用超声综合处理技术,可以快速在几分钟,去除油、锈表面的工件,避免由于强酸清洗与氢脆。
The traditional method is to soak and clean with hydrochloric acid or sulfuric acid. If the ultrasonic comprehensive treatment technology is used, the workpiece on the oil and rust surface can be removed quickly in a few minutes to avoid strong acid cleaning and hydrogen embrittlement.

联系大家

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:济南市先行区太平街道机械装备产业园创业路二号

亚洲城ca88手机版

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:

亚洲城ca88手机版|官亚洲城会员登录入口

XML 地图 | Sitemap 地图