亚洲城ca88手机版-官亚洲城会员登录入口-首页

服务热线电话

400-6188-756

常见的亚洲城ca88手机版厂家温控方式浅谈!

来源:/ 时间: 2021-07-15 浏览次数: 2

亚洲城ca88手机版一般会有定时或加热功能,大家先容了几种th系列超声波清洗机的几种常见定时配置,今天大家就再先容几种常见的加热配置,希翼能通过此文让您对超声波清洗机有个更好的了解。
Automatic ultrasonic cleaning machine generally has timing or heating function, we introduced several common timing configuration of th series ultrasonic cleaning machine, today we will introduce several common heating configuration, hope to let you have a better understanding of ultrasonic cleaning machine through this article.
1、数控面板加热
1. Numerical control panel heating
一般实验室用的数控超声波清洗机,带有加热功能的机型,如th-300bq,就是数控按键加热。数控区显示当前温度,可以设定温度值,当达到加热值是自动停止加热。此种加热一般是用硅胶板加热。
The general laboratory used numerical control ultrasonic cleaning machine, with heating function, such as th-300bq, is the numerical control key heating. The current temperature is displayed in the numerical control area, and the temperature value can be set. When the heating value is reached, the heating will be stopped automatically. This kind of heating is generally with silica gel plate heating.
           亚洲城ca88手机版厂家
2、温控仪加热
2. Temperature controller heating
分体超声波清洗机根据使用情况有用温控仪加热,使用方法如下:按下加热开关,温控仪将显示测量温度与控制温度。上面显示的是测量温度,下面显示的是控制温度,当测量温度低于控制温度时,温控仪上out灯亮,加热指示灯亮,设备处于加热状态;当测量温度高于控制温度时,温控仪上out灯灭,加热指示灯熄灭,设备停止加热。控制温度设置方法:按拨码键设定控制温度,如058,控制温度为58度。此种一般是用加热管加热。
Separate ultrasonic cleaning machine according to the use of useful temperature controller heating, use the following: press the heating switch, temperature controller will display the measured temperature and control temperature. When the measured temperature is lower than the control temperature, the out light on the temperature controller is on, the heating indicator is on, and the equipment is in the heating state; When the measured temperature is higher than the control temperature, the out light on the temperature controller goes out, the heating indicator goes out, and the equipment stops heating. Control temperature setting method: press the dial key to set the control temperature, such as 058, the control temperature is 58 degrees. This kind of heating pipe is usually used for heating.
3、机械温控
3. Mechanical temperature control
普通台式超声波清洗机一般用机械温控,也就是旋钮调节温度,如th-500q型台式超声波清洗机,温度调节范围为常温-80度。
Ordinary desktop ultrasonic cleaning machine generally uses mechanical temperature control, that is, knob to adjust the temperature, such as th-500q desktop ultrasonic cleaning machine, the temperature range is - 80 ℃.

联系大家

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:济南市先行区太平街道机械装备产业园创业路二号

亚洲城ca88手机版

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:

亚洲城ca88手机版|官亚洲城会员登录入口

XML 地图 | Sitemap 地图