亚洲城ca88手机版-官亚洲城会员登录入口-首页

服务热线电话

400-6188-756

工业超声波清洗机跳闸的原因分析!

来源:/ 时间: 2021-07-05 浏览次数: 2

随着清洗行业的不断发展,越来越多的行业和企业都运用到了超声波清洗机。在使用过程中总会遇到各种各样的状况,工业超声波清洗机跳闸是很常见的一个故障。
With the continuous development of cleaning industry, more and more industries and enterprises have applied ultrasonic cleaning machine. In the process of use, there will always be a variety of conditions, industrial ultrasonic cleaning machine trip is a very common fault.
导致超声波清洗机跳闸的一个可能性原因可能是电路引起的短路,线路接错或者线路老化都可能引起电路发生短路的现象。原因二可能是整流桥短路,超声波清洗机发生整流桥短路也会引起使用过程中跳闸,好的解决办法是换新的整流桥。后一个原因和清洗频率的设定有关,如果清洗的物品过多同时设定的清洗频率太高,也很容易产生跳闸现象。
                工业超声波清洗机设备
One of the possible reasons for the trip of the ultrasonic cleaning machine may be the short circuit caused by the circuit. The wrong connection or aging of the circuit may cause the short circuit of the circuit. The second reason may be the short circuit of the rectifier bridge. The short circuit of the rectifier bridge of the ultrasonic cleaning machine will also cause the trip in the process of use. A good solution is to replace the rectifier bridge. The latter reason is related to the setting of cleaning frequency. If there are too many items to be cleaned and the setting of cleaning frequency is too high, it is easy to trip.
对于跳闸现象是时常性的故障,对此需要先找到原因,然后再根据原因得到解决办法。
For the trip phenomenon is a frequent fault, we need to find the reason first, and then get the solution according to the reason.
以上是关于“工业超声波清洗机设备跳闸的原因分析”的先容,相信大家都有所了解了,如想了解更多精彩资讯请点击大家的网站:
The above is about the "industrial ultrasonic cleaning machine equipment trip reason analysis" introduction, I believe you all know, if you want to know more wonderful information, please click our website: 。

联系大家

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:济南市先行区太平街道机械装备产业园创业路二号

亚洲城ca88手机版

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:

亚洲城ca88手机版|官亚洲城会员登录入口

XML 地图 | Sitemap 地图