亚洲城ca88手机版-官亚洲城会员登录入口-首页

服务热线电话

400-6188-756

超声波清洗机厂家是如何检测设备故障的?

来源:/ 时间: 2021-07-16 浏览次数: 2

超声波清洗机的应用是非常广泛的,在使用的过程中,有时候设备会出现故障。那么,到底要如何检测超声波清洗机的故障呢?下面几点可以参考一下。
Ultrasonic cleaning machine is widely used, in the process of use, sometimes equipment failure. So, how to detect the fault of ultrasonic cleaning machine? The following points can be referred to.
1、如果使用超声波清洗机的时候发现某个设定位置不能够停止而导致动作错误的话,要检查升降臂相应的感应开关有没有异常,如果有受损或者松脱情况的要处理好。
1. If it is found that a certain set position can not be stopped when using the ultrasonic cleaning machine, which leads to action error, check whether the corresponding induction switch of the lifting arm is abnormal, and deal with it if it is damaged or loose.
        亚洲城ca88手机版
2、设备上下左右行程处都有安全保护装置,如果行程超越设置机器会停止,这时候要手动复位,重新调整好行程开关或者感应片。
2. There is a safety protection device at the up, down, left and right travel of the equipment. If the travel exceeds the setting, the machine will stop. At this time, it is necessary to reset manually and readjust the travel switch or sensor.
3、如果移动架不能正常运行,限位开关会将机器制止,这时候要手动把移动架返回到正确的位置。
3. If the moving frame can't work normally, the limit switch will stop the machine. At this time, the moving frame should be returned to the correct position manually.
除了以上几点外,其实超声波清洗机出现问题的情况还有很多种,遇到问题一定要及时查找原因并解决问题。
In addition to the above points, in fact, there are many kinds of problems in the ultrasonic cleaning machine, we must find out the reasons and solve the problems in time.

联系大家

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:济南市先行区太平街道机械装备产业园创业路二号

亚洲城ca88手机版

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:

亚洲城ca88手机版|官亚洲城会员登录入口

XML 地图 | Sitemap 地图